/////////////////////////////////////////////////////////////////////// // Settings for Falcon 4.38.2 // // // // WARNING: this file will be overwritten by future updates! // // // // Place all user-defined config params in Falcon BMS User.cfg // // // /////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////// // GENERAL // /////////////////////////////////////////////////// set g_bBarcapNoBarcap 0 // For 2D combat : A BARCAP flight will not engage an enemy BARCAP flight. set g_nPrintToFile 1 // Enables output of detailed briefing data to "briefing.txt" file. set g_bAppendToBriefingFile 0 // Appends new briefings to "briefing.txt" instead of overwriting old ones. set g_bBriefHTML 0 // Generates Briefings using HTML tags. set g_bLogEvents 1 // Enables output of detailed debriefing data to "debrief.txt" file. Output is appended at the end of the file each time. set g_bPngScreenshots 1 // Save screenshots as PNG instead of JPG. set g_bPlayIntroMovie 1 // Select to enable the start up intro movie. set g_bRampTaxiStart 0 // Enables taxi at parking spot instead of taxiway. /////////////////////////////////////////////////// // AVIONICS // /////////////////////////////////////////////////// set g_fCursorSpeed 1.0 // Customizes the cursor control speed for various MFD controls (FCR, HSD, HAD, WPN, TGP, etc). Applies to both analog and discrete cursor-inputs. Range: [0.5-2.0, by 0.25] set g_bMFDHighContrast 0 // Uses different colors on color MFD (helps with blindness distinction) set g_fRadarScale 0.75 // Changes the size of the radar blips. Default 0.75; Values: [0.25, 0.5, 0.75, 1.0, 1.25, 1.5] set g_bHSD_HAD_FCR_Font 1 // Enable the realistic/smaller font (same as Bullseye) for HSD/HAD (PPTs, IDM wingmen, etc) & FCR (bugged tgts, IDM wingmen, DLZ). Enable for less display clutter, disable for better readibility. set g_fHADSymbolSize 0.020 // Scales the waypoint symbols on the HAD display down to more realistic sizes. May be too small for lower resolutions. Edit with caution. set g_fHSDSymbolSize 0.020 // Scales the waypoint symbols on the HSD display down to more realistic sizes. May be too small for lower resolutions. Edit with caution. set g_bNoDTCForRampStart 1 // Suppress loading of the DTC ini file content when the player selects Ramp Starts. set g_bCalibrationHg 1 // Select Hg for Altimeter (North American). set g_bEnableRandomFailures 0 // Enables random failures. set g_fMeanTimeBetweenFailures 0 // The MTBF in hours. If set to 0, uses the value in ac.dat set g_bEnableWIPF18Avionics 0 // F-18C Work In Progress Avionics (disabled by default) set g_bFLIRCircularMask 0 // Mask the FLIR on HUD image to the circular HUD projection; default = 0 (square) set g_fFLIRMaskRadius 1.1 // Radius of the circular FLIR mask in canvas units (1.0 = inscribed circle, ~1.41 = no masking); default 1.1, clamped 1.0-1.414 /////////////////////////////////////////////////// // MULTIPLAYER // /////////////////////////////////////////////////// set g_nTaxiLaunchTime 4 // Time before Takeoff Time to launch to TAXI (in min). Clock counts down to 1 min prior to set value then loads 3d world. set g_nRampMinutes 25 // Time before Takeoff Time to launch to RAMP (in min). Clock counts down to 1 min prior to set value then loads 3d world. set g_nReagTimerCamp 10 // Airbase A/C despawn in Campaign -> delay before disappearing (in min). set g_nDeagTimerCamp 10 // Airbase A/C spawn in Campaign -> lead time before taxiing (in min). set g_nReagTimerTE 20 // Airbase A/C despawn in Tactical Engagement -> delay before disappearing (in min). set g_nDeagTimerTE 20 // Airbase A/C spawn in Tactical Engagement -> lead time before taxiing (in min). set g_nRespawnTimeforStuckAI 6 // Improved method to allow servers to despawn stuck AI on airbases automatically. set g_npercentage_available_aircraft 75 // Determines what proportion of your squadron's roster will be available (in %). set g_nminimum_available_aircraft 4 // Setting allows you to limit the effect of a low "percentage" setting (lower-limit of available aircraft). set g_bEnableABRelocation 1 // Airbase relocation. Allows a squadron to relocate to other airbases if their own base is damaged to a certain level. set g_nForceMinClientBwSetting 2048 // Allows the MP host to specify a minimum client bandwidth setting (default 0 = no value forced). set g_bNoAiForHumanControlledSqd 0 // Allows the MP host to specify whether AI pilots can be assigned for player controlled squadrons (default 0 = false). set g_bFogOfWarSave 0 // If set, a client can save only the units of his team or allied, and the enemy spotted units (default 0 = false). set g_nRemoteControlSurfacesInterval 200 // Time in ms between control surface updates, valid range 20-1000 (default 200), 0 = disabled. set g_bHostDisableP2pForDubiousConnections 0 // If activated, dubious connections will automatically be forced to CS although they would work as P2P (default 0 = false). set g_bEnforceBandwidthLimits 0 // If set, the network transfer rates set in the UI will be enforced - BMS usually does limiting based on "best effort" only (default 0/false). set g_fAmbientmin 0.01 // Allows to tweak sky brightness at night set g_bEnableGtraining 1 // Enables G training mechanism for human player (G warmup). set g_bRequireSameCloudsMP 0 // Allow MP hosts to enforce same cloud-model (billboard vs volumetric). Useful for TvT events where different cloud model may provide tactical advantage. set g_bRequireSimilarTreesMP 0 // Allow MP hosts to enforce similar trees (g_bNewTerrainRenderTrees, g_fTreesMinDensityFactor). set g_bAllowMP_Freeze 0 // Allows the MP host to specify whether "freeze" pause can be used. set g_bAllowMP_NVG 1 // Allows the MP host to specify whether NVGs can be used. set g_bAllowMP_NVGFullscreen 1 // Allows the MP host to specify whether NVGs can be used in fullscreen mode. set g_bRequireSameAcdataMP 0 // Allows the MP host to specify whether ACDATA files need to be the same in MP. Basically it is an Anti-Cheat system. set g_bRequireSameTileSetMP 1 // Allows the MP host to specify whether clients have to use the same tileset. set g_bAllowMP_Smoke 1 // Allows the MP host to specify whether smoke can be used (like Thunderbird aircraft smoke). set g_nMPStartRestricted 0 // Allows the MP host to specify which startup options are allowed (RAMP/TAXI/TAKEOFF). Values: [All, Ramp/Taxi, Ramp] set g_bTacviewRealTime 0 // Enables Tacview RealTime server set g_nTacviewPort 42674 // TCP port on which Tacview server listens for new connections set g_bTacviewIpv6 0 // Host Tacview server on IPV6 protocol set g_sTacviewPassword "" // Tacview server password (character string) set g_bMPTacviewRtAllowedByServer 1 // Tacview server allows clients to use Tacview RealTime ///////////////////////////////////////////////////// // RADIO & COMMS // ///////////////////////////////////////////////////// set g_nF1TeamUiFreq 339750 // Frequency for F1 UI voice comms (for Force on Force type missions). set g_nF2TeamUiFreq 1234 // Frequency for F2 UI voice comms (for Force on Force type missions). set g_bInitBUPfromDTC 1 // If set, the UHF Backup presets will be initialized with the UFC DTC values instead of the usual hardcoded internal values. set g_bUseIvcUiVolume 1 // UI IVC Volume is controlled independently from the COMM1/2/UHF/VHF volume sliders. set g_nIvcUiVolume 5 // UI IVC Volume in db, range -6 to +6 (if controlled independently). set g_fRadioBalance 0.0 // The value in DB on how much to shift the UHF/VHF playback volume out of center (into opposite directions), range +/-100.0 set g_nDynamicVoices 128 // Maximum number of voices allocated by the sound code. set g_nSoundUpdateMS 10 // How many milliseconds must elapse before the sound code updates. set g_nSoundSwitchFix 1 // This patch may fix the problem of AI comms disappearing. set g_nMaxBRAARange 25 // This determine the distance at which the radio communications will use BRAA instead of BE, default 25. set g_bDisableCommsMenu 0 // If set, the comms menu (Tower/Awacs/Wingman ... etc ...) will no longer be drawn. set g_nRadioMenuAlpha 25 // Transparency level of the Comm's menu window in %, 0% is fully transparent, 100% is fully opaque. set g_bRingCommMenu 1 // Uses Ring-style comm menu. Set 0 to use IMGUI comm menu. ///////////////////////////////////////////////////// // 3D & GRAPHICS // ///////////////////////////////////////////////////// set g_sTexturesLODPreset "High" // Sets max texture resolution for terrain, procedurals, cockpit, and object models (for "Custom" see technical manual) Values: [High, Medium, Low, Custom] set g_nHdrToneMapMode 11 // Tone mapping - use ".tmm [0-11]" chat command to tune, in-flight. Values: [None, Uchimura, Khronos Neutral, ACES, ACES Hill, UC2, Hejl 2015, Filmic, Reinard Jodie, AGX, Lottes, GT7] set g_nPostAAMode 0 // Shader-based antialiasing mode (similar results as MSAA but may increase FPS). Values: [Off, FXAA (Nvidia-only)] set g_bEjectFirstPersonView 0 // Enables first-person point of view from the ejected pilot's head. TIR, VR, or mouse look control the view within natural head limits. Disabled uses the orbit camera on the pilot in the chute. set g_bCanopyOpenForRampStarts 1 // Option to have the canopy open at mission start when you choose "RAMP". set g_bFullScreenNVG 0 // Enables full screen Night Vision Goggles. NOTE: It is not possible to read instruments on NVGs except the HUD. This option will prevent the pilot from reading MFDs, switches and gauges completely. set g_bEnableDisplacementCam 1 // Makes the orbit view 'wobble' around a bit around the viewed (airborne) aircraft. set g_nActionCameraTimer 8000 // Sets the duration in ms for the action camera before switching views. (default is 8000, i.e. 8 seconds). set g_bUseTracerColors 1 // Any aircraft from a Red team will have green tracers. set g_nJetHeatShaderMaxSpeed 250 // Jet Heat Exhaust will disappears when speed (in knots) exceed this value (default 250 knots). set g_bVolumetricCloud 1 // Renders new volumetric clouds. Disable to use old 2d billboards. set g_fVolumetricCloudResolutionMultiplier 1.0 // Changes the volumetric cloud resolution multiplier. Range: [0.5-1.41] set g_bNewTerrainRenderTrees 1 // If you want Trees to be rendered. WARNING: may affect multiplayer compatiblity (see g_bRequireSimilarTreesMP) set g_fTreesMinDensityFactor 1.0 // Allow tree-range slider to control density as well as range. WARNING: may affect multiplayer compatibility. Values: [0.25, 0.5, 0.75, 1.0] set g_bNewTerrainRenderShrubs 1 // If you want Shrubs and rocks to be rendered set g_bNewTerrainRenderGrass 0 // If you want Grass to be rendered set g_bPBRCanopyRain 1 // Enable or disable the canopy rain effects. Disabling may improve fps. set g_fCanopyRainBlur 1 // Canopy and camera lens rain: how much the water blurs the view through it. Range from 0 to 1.0 (0: it only bends the view) set g_bReducePSFires 0 // Reduce by 50% (average) the number of some main PS effects like ground units and features Burning-stacks and explosions in order to reduce FPS hit. set g_bHdrLighting 1 // Enables HDR (High Dynamic Range) lighting and blending effects. set g_bHdrLightingStar 1 // Enables the HDR light star effect. set g_bUseHeatHazeShader 1 // Enables the jet exhaust heat effect. set g_bShowFarRain 1 // Use shaders to render additional rain. set g_bShowRainDrops 1 // Show rain drops on the canopy. set g_bShowRainRings 1 // Show rain rings on the ground. set g_bCameraLensRain 1 // External camera views: the canopy's simulated water on the camera lens instead of the sprite drops set g_bShadowMapping 1 // Enables shadows for the cockpit and a small area around the viewer. Always ON when Volumetric clouds are ON. set g_bShadowOnSmoke 0 // Renders shadows on particles. Warning : use with caution, this option has a huge FPS impact. set g_bEnvMapRenderClouds 1 // Render the clouds into the environment map. set g_bEnvMapRenderFocusObject 1 // Renders the focused object into the environment map. set g_bDxgiFlipModel 1 // Use newer DXGI flip-discard mode (reduces latency on windowed and borderless modes, enables VRR support, and is more reliable for headless MP servers - but currently breaks fullscreen-exclusive mode). Tip: make sure Triple Buffering is enabled, using this! set g_bEnableVRR 0 // Enables VRR (variable refresh rate, aka G-Sync/FreeSync) when v-sync is disabled - to allow uncapped fps with absolute minimum input-to-render latency. (May result in screen-tearing artifacts if used on a non-VRR display.) Requires g_bDxgiFlipModel. set g_bExportRTTTextures 0 // Enables the shared texture memory area for HUD/MFDs/HMS/RWR/DED/PFL. May impact fps. (Note: this setting will be overridden by the Launcher) set g_nRTTExport_FPS 30 // This determines the desired update-rate for shared texture memory. Range: [1-60] set g_fSmartScalingThreshold 1.0 // If SmartScaling is enabled via the UI, the distance-offset (in nautical miles) from your camera position, where scaling will begin (default 1.0). set g_nAnisotropicValue 0 // The anisotropic filtering level to use, if anisotropic filtering is ON in the setup UI. (0 = max available, according to your driver) Values: [0, 2, 4, 8, 16] set g_bHiResTextures 1 // Use high resolution textures located in KoreaObj_HiRes and Misctex_HiRes. set g_fNewTerrainProceduralDistance 12.0 // Distance radius (in km) for procedural texturing - this may heavily effect performance of the terrain shader, especially at low altitude. Range: [0-12] set g_nNewTerrainHiresTilesDistKM 32 // Distance at which Hires tiles (airbases, cities, etc) will appear. Values: [0, 16, 32] set g_nCockpitDepthMaskMode 1 // Avoid drawing pixels which are occluded by the opaque 3D cockpit. Recommend "Mono-VR" if using VR with mono terrain rendering. Values: [Disabled, Enabled, Mono-VR] set g_nNewTreesDepthPrepassMode 0 // New trees depth prepass. Values: [Disabled, All sectors, Close sectors] set g_nNewShrubsDepthPrepassMode 0 // New shrubs depth prepass (only runs below 300 ft AGL). Values: [Disabled, All sectors, Close sectors] ///////////////////////////////////////////////////// // 3D OVERLAYS // ///////////////////////////////////////////////////// set g_nNumberOfSubTitles 10 // Determines the maximum number of simultaneously displayed subtitles. set g_nSubTitleTTL 10000 // Governs the time a radio subtitle is drawn. set g_fSubtitleWrapWidth 0.6 // Radio subtitle text line width before it gets wrapped, 0.0 (nothing) to 2.0 (full view width). set g_bWindowedRadioSubtitles 0 // Use IMGUI to display radio subtitles in a window that will allow more controls for message display options. set g_nMessageScrollTime 15 // Time in seconds until a chat message scrolls out of view. set g_bWindowedChat 1 // The Chat function (Shift T) -- Messages sent to the player and the line being typed on use an IMGUI window. In VR, it then rides the IMGUI quad with the subtitles. set g_bNoPadlockBoxes 0 // Removes padlock boxes completly. set g_nPadlockBoxSize 2 // Adjusts the size of the padlock box. Values: [0, 2] set g_nPadlockBoxThickness 1 // Determines the thickness of the padlock box. set g_fPadlockBoxTimeout 3 // Number in seconds for how long the box should be displayed over any one padlock subject before it disappears (-1 turns it off). set g_bOnlinePlayersDisplayDefault 0 // Specifies whether the OnlinePlayersDisplay overlay should be ON(1) or OFF(0) by default when entering 3D. set g_bShowFrameRateDefault 0 // Specifies whether the frame rate overlay should be ON(1) or OFF(0) by default when entering 3D. set g_bACMIRecordMsgOff 1 // Turns off the ACMI RECORDING message. set g_sRadioStandardCol "0xFFFF0000" // Sets radio standard comm subtitles to bright blue. set g_sRadioTowerCol "0xFF00FF00" // Sets radio tower comm subtitles to bright green. set g_sRadioflightCol "0xFF0000FF" // Sets radio flight comm subtitles to bright red. ///////////////////////////////////////////////////// // HOTAS, FOV & KEY // ///////////////////////////////////////////////////// set g_bUseXInput 1 // Use XInput plug and play, default 1. If disabled, use controller/device as pure DXInput device. set g_bVibrateXInput 1 // Vibrate Gamepad set g_nHotasShiftQuickPressTimeLimit 150 // Timeout (milliseconds) for disambiguating pinky-switch (tap) vs DX-shift (hold). set g_nKnobAccelerationDelta 150 // Timeout (milliseconds) for invoking knob-acceleration on repeated clicks (eg. CRS/HDG knob). Useful for encoder-wheels. set g_fMouseSensitivity 1.0 // Mouse-cursor speed in 3D. Values: [0.5, 1.0, 1.25, 1.5, 2.0, 2.5, 3.0] set g_bMouseWheelKnobs 1 // Allows mouse wheel to turn knobs in 3d pit. set g_bEnableExclusiveMouseCapture 1 // Captures the mouse when in 3D so that you don't click something on the desktop when running windowed mode. set g_bMouseButton4TogglesClickablePit 0 // If set, the 4th mouse button (if available) will toggle between mouselook and clickable pit. set g_fDefaultFOV 60 // Changes your default field of view (FOV) setting (degrees). Values: [40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100, 105, 110, 115, 120] set g_fFOVIncrement 5 // Sets how much the field of view should change for each keypress (degrees). set g_fMaximumFOV 120 // Maximum limit for field of view (degrees). set g_fMinimumFOV 20 // Minimum limit for field of view (degrees). set g_fNarrowFOV 20 // Defines the narrow field of view used by the "Look Closer" view command. set g_bExternalTrackIR 0 // TrackIR input will slew the orbit view. If you own the vector expansion, it will also control zoom. set g_bInvertExternalTrackIR 0 // TrackIR azimuthal input in external view will be inverted. set g_bAfterburnerDetentClick 0 // Makes the same clicks when the throttle passes the afterburner detent as it does when passing the Idle detent. set g_bUseVirtualRudder 0 // This is ONLY for people who use racing wheel pedals and are NOT able to combine them into one axis via the wheel's drivers. set g_bUseDeprRetAsBrake 0 // For use with g_bUseVirtualRudder true only: make it possible to have analog brake input as well. set g_b3DClickableCursorAnchored 1 // If enabled, the cursor is anchored on hotspot while moving view. set g_b3DClickableCursorChange 1 // Setting this enables the cursor to let the pilot know he is over a clickable area of the 3D pit. set g_bHotasDgftSelfCancel 0 // If set, the Dogfight/Missile Override callbacks (SRM/MRM) will call "override cancel" automatically upon release. Useful for controllers where the override switch on the throttle is a 3-position switch, but only the 2 outwards positions actually create a DX button input. set g_bUseAnalogIdleCutoff 0 // Enables the OFF-IDLE throttle range. (Note: this is not needed by most modern throttle devices, which report 0% and signal a button-press when in their cutoff-range) ///////////////////////////////////////////////////// // USER INTERFACE // ///////////////////////////////////////////////////// set g_bNoAAAEventRecords 0 // This option, set to 1, removes AAA shots from debrief. set g_sThreatCircleColor_RadarHigh "0xFF0000" // The color of the UI map thread circle for "Radar High", set as hex, "0xBBGGRR". set g_sThreatCircleColor_RadarLow "0xFF0000" // The color of the UI map thread circle for "Radar Low", set as hex, "0xBBGGRR". set g_sThreatCircleColor_ADAHigh "0xFF00FF" // The color of the UI map thread circle for "ADA High", set as hex, "0xBBGGRR". set g_sThreatCircleColor_ADALow "0xFF00FF" // The color of the UI map thread circle for "ADA Low", set as hex, "0xBBGGRR". set g_nThreatCircleContrast_RadarHigh 40 // The strength of the color mixing if 2 or more threat circles of type "Radar High" overlap. Range 0-100 set g_nThreatCircleContrast_RadarLow 40 // The strength of the color mixing if 2 or more threat circles of type "Radar Low" overlap. Range 0-100 set g_nThreatCircleContrast_ADAHigh 40 // The strength of the color mixing if 2 or more threat circles of type "ADA High" overlap. Range 0-100 set g_nThreatCircleContrast_ADALow 40 // The strength of the color mixing if 2 or more threat circles of type "ADA Low" overlap. Range 0-100 set g_bAutoLoadCommPlanToDTC 1 // Enables auto-loading of the Comm Plan frequencies associated with your flight in the DTC. ///////////////////////////////////////////////////// // AUTO SAVE // ///////////////////////////////////////////////////// set g_nTacPeriodicSaveMinutes 0 // TE time in minutes between automatic cyclic game saves (0 = disabled). set g_nCampPeriodicSaveMinutes 0 // Campaign time in minutes between automatic cyclic game saves (0 = disabled). set g_sCampPeriodicSaveName "Auto" // Prefix for the automatic cyclic save name (campaign date and time will be added automatically). ///////////////////////////////////////////////////// // DIRECTORIES // ///////////////////////////////////////////////////// set g_sLogsDirectory "" // If set, redirects the logfile output from \User\Logs to the specified directory. set g_sAcmiDirectory "" // If set, redirects the ACMI directory from \User\Acmi to the specified directory. set g_sPicturesDirectory "" // If set, redirects the pictures directory from \User\Pictures to the specified directory. set g_sBriefingsDirectory "" // If set, redirects the briefing output from \User\Briefings to the specified directory. set g_sPatchesDirectory "" // If set, redirects the patches directory from \User\Patches to the specified directory. ///////////////////////////////////////////////////// // OTHER // ///////////////////////////////////////////////////// set g_bPreventScreensaver 1 // Prevent activation of screensaver/powersave mode (1 = prevent, 0 = do not prevent). set g_bPrettyScreenShot 0 // If set, "PrtScr" key will make pretty screenshots (no overlays) instead of normal ones (1 = pretty, 0 = normal). set g_nJpegCompression 90 // Sets the compression level for JPEG screenshots, 0-100 (default 90). set g_bF16MfdHasRwr 0 // Enables the RWR MFD page back for the F16s (unrealistic feature). set g_bhudAOA 1 // Enables the HUD AOA for non-F16 aircraft. set g_bPilotEntertainment 0 // Enables the user to control WinAmp. set g_nWinAmpInitVolume 204 // Sets the initial WimAmp volume. set g_nBumpIntensityMinTime 100 // This determines the minimum bump intensity "peak time", i.e how long a value is visible in shared memory (default 100). set g_bPlayDogfightBits 1 // Enables playback of the various sound comments in the dogfight scores menu. set g_fViewlimitPitchDown 0.0 // Overrides all A/C "viewlimit pitch down" values from the 3dckpit.dat files, max. 90.0, only higher values take effect. set g_bExternalTacview 0 // Tacview is filtered and saved by an external program; requires tacview-server.exe, a 3rd party tool. //////////////////////////////////////////////////// // DEV SETTINGS // //////////////////////////////////////////////////// // set g_sPathFlightModelManager "...\Flight Model Manager\Flight Model Manager.exe" // Allows to open acdata with FMM from editor. Uncomment and set to corresponding program folder to enable. // set g_sPathMissileDataManager "...\Missile Data Manager\Missile Data Manager.exe" // Allows to open misdata with MDM from editor. Uncomment and set to corresponding program folder to enable. // set g_sPathVehicleDataManager "...\Vehicle Data Manager\Vehicle Data Manager.exe" // Allows to open veh files with VDM from editor. Uncomment and set to corresponding program folder to enable. set g_bLabelShowDistance 1 // When turned On, labels also display distance in nm. set g_bSmartCombatAP 1 // Enables the Combat Autopilot to shoot AA missiles. set g_bNoRPMOnHud 1 // Removes the RPM indication on your HUD, as in the real aircraft. set g_fAIRefuelSpeed 1 // Sets a multiplier factor so AI refuel faster on the boom. set g_bAnyWaypointTask 1 // Allows you to assign any task to any waypoint. set g_bAIGloc 1 // Toggles AI g-LOC (g-Force-Induced Loss of Consciousness) set g_bAIjamLogic 0 // Changes to the AI jamming usage (no support). set g_bScramble 1 // Allows scramble missions. set g_bExternalTrackIROrientation 1 // Control camera pov direction instead of position, with TrackIR (mouse controls position) set g_nTrackIRTimeout 1000 // The time (in ms) without input after which TrackIR deactivates itself and relinquishes control to alternative devices. set g_bSaveLegacyDb 0 // Synchronize the bin files to match the xml files when the game/editor is started. set g_bEnableTTS 1 // If set, globally enables the Text-To-Speech (TTS) functionality. set g_nTTSSpeedAdjust 0 // Sets the TTS talking speed, default speed is 0, range -10 to 10. set g_sPPTRingColor "0x0000FF" // The color of the UI map PPT rings, set as hex, "0xBBGGRR". set g_nPPTRingWidth 1 // The width in pixels of the UI map PPT rings. set g_bEnableNewTerrain 1 // Obsolete (always true) but some external software (such as MC) may scan for this. ////////////////////////////////////////////////////////// // DEBUG SETTINGS // ////////////////////////////////////////////////////////// set g_bLogInputFunctions 1 // Debug setting - logs key presses in .xlog file set g_bActivateDebugStuff 0 // Debug Setting - Master setting for all subsequent settings, host controlled in MP. set g_nShowDebugLabels 0 // Debug Setting - Displays info labels. set g_bCampLabels 0 // Debug Setting set g_bAIprofile 0 // Debug Setting set g_bShowMipUsage 0 // Debug Setting set g_b3DClickableCockpitDebug 0 // Debug Setting set g_bFake3dpit6DOF 0 // Debug Setting set g_bAI_AG_Debug 1 // Debug Setting - when AI fails a Ground attack, displays info in the monolog set g_bDevelopmentCallbacks 0 // Dev Setting set g_bEnableCombatAP 0 // Dev Setting - Enables Combat Autopilot for developement and tests purposes. This is not equal to a pure AI! set g_bMultiHitboxEnable 1 // Dev Setting - Enables multiple hitboxes located in Parent and aicraft.dat set g_sCpuPerfOptimizations "all" // Dev Setting set g_sPriorityFixes "all" // Dev Setting set g_sCompatibleChanges "all" // Dev Setting set g_sNonCompatibleChanges "none+NEW_LOADING_SCREEN_LOGIC+FUEL_TRANSFER_UPGRADE+HEAD_TRANSLATION_OFFSET+MAG_VARIATION+PREPARE_PROTOFY_FM+NEW_CAMPAIGN_TERRAIN+DISPLAY_PLAYERS_COUNTDOWN+REMOVABLE_CFT+READ_STORES_GC_FROM_AFM+RUNWAY_MARKING" // Dev Setting set g_nObjectiveDataReadMode 0 // Dev Setting - 0 Read from split up files, 1 Read the data from the aggregated files. set g_nObjectiveDataWriteMode 0 // Dev Setting - 0 Write split up only, 1 Write aggregated files only, 2 Write both the split up and aggregated files. ///////////////////////////////////////////////////// // VR SETTINGS // ///////////////////////////////////////////////////// set g_fVRZoom 2.0 // Factor to reduce field-of-view in VR, for LookCloser callback. set g_nVRHMCSEYE 0 // HMCS renders, 0 right eye, 1 left eye, -1 both eyes. set g_nVRLineOfSightOffset 0 // Allow HMCS, NVGs and Flashlight center point to be lowered if headset center view point is elevated above actual eye level (i.e., Quest 3). Default 0 (unchanged). Range: 0 to 30, in 5 deg increments. Recommended 5 for Quest 3. This allows proper HMCS blanking (no double symbology) while looking directly at the HUD, and centers the NVGs and flashlight at the pilot's natural eye level. set g_nVRExternalRenderingMode 0 // Rendering of outside-cockpit world - 0: mixed (default); 1: always mono; 2: always stereo set g_fVRAltitudeFeetToRenderMono 30.0 // For 'mixed' rendering, the AGL transition altitude - below=stereo; above=mono (default: 30 ft) set g_fVRResolution 1.0 // VR resolution multiplier. set g_fVRIPDMultiplier 1.0 // VR interpupillary distance (IPD) factor. set g_bVRParallelRenderThread 1 // Enable multi-threaded rendering for VR (1: higher throughput; 0: lower latency). set g_bVRPredictFutureHeadMatrices 0 // Predict future head matrices for SteamVR. Only works with g_bVRParallelRenderThread enabled. set g_bVRNoPresent 0 // This will not display the companion window in VR (only HMD will show image in 3d). set g_bVrFitWindowToMonitor 1 // Fit the VR desktop window into its monitor (default 1); 0 keeps the full eye-sized mirror window. set g_bMixedRealityCockpitCoverEnabled 0 // Setting this will default the Mixed Reality Cockpit Cover on (1) or off (0). Can still be toggled in game. set g_b3DClickableCursorFixToCenterIfVR 0 // Option to keep mouse cursor centered on display (use SimToggleCursorCenter to toggle this, in-flight) set g_nVRFoveatedRenderingMode 1 // 0 = Off (stereo), 1 = Fixed Foveated Rendering (FFR), 2 = Dynamic (eye-tracked) Foveated Rendering, 3 = Quad Views. set g_fVRInnermostRadiiFFR 0.7 // Inner most FFR radii; default 0.7 - see VR Guide for details set g_fVRMiddleRadiiFFR 0.75 // Middle FFR radii; default 0.75 set g_fVRPeripheralRadiiFFR 1.0 // Peripheral FFR radii; default 1.0 set g_nVrSubtitlesFontSize 16 // VR subtitles and chat quad text size. Size in points as seen at 50cm. set g_fVolumetricCloudResolutionMultiplierVR 1.0 // Changes the Volumetric Cloud resolution (in VR) via multiplier. Default 1.0; range 0.5 - 1.41. ///////////////////////////////////////////////////// // SPECIAL VR SETTINGS // ///////////////////////////////////////////////////// set g_fVrFocusGazeDeadzoneDeg 0.0 // Degrees gaze must move before focus inset follows (dead zone). Quad views only. set g_fVolumetricCloudFocusResolutionMultiplierVR 1.0 // Volumetric cloud resolution multiplier for quad-views FOCUS pair (0.5..1.41); VolumetricCloudResolutionMultiplierVR covers periphery only. Quad views only. set g_bXrVisibilityMask 1 // XR_KHR_visibility_mask: rejects lens-hidden view corners in depth before draw. OpenXR only; ignored if runtime lacks the mask. set g_bVrControllers 0 // OpenXR controllers in 3D cockpit: beam picks switches, trigger clicks, thumbstick turns knobs/holds mouse button, A/X opens ring comm menu, B/Y recenters HMD. set g_bVrRayLabel 1 // Prints each cockpit switch name under beam next to endpoint glyph. set g_fVrCursorFreeNear 0.75 // VR cursor depth-off distance (pit units, ft) from nearest switch where depth starts leaving the panel. set g_fVrCursorFreeFar 2.0 // Distance (pit units, ft) where cursor depth is fully at the world seat. set g_fVrCursorFarLen 500.0 // Depth of that world seat. set g_bVrHandTracking 0 // On enables skinned gloves on tracked hands. set g_bVrHandRay 0 // A tracked hand points a ray from the index fingertip, a pinch clicks set g_bVrHandRayRuntimeAim 0 // The ray from the runtime's own aim pose, not along the palm (default 0). set g_bVrHandSwitchInvert 0 // Flip which way a grabbed switch steps (default OFF). set g_bVrHandKnobInvert 0 // Flip which way a grabbed knob turns (default OFF). set g_fVrHandTouchScale 1.0 // Fingertip reach against the hotspot size (1.0 = hotspot size, larger = easier to hit) set g_fVrHandSwitchDragCm 0.5 // Hand travel per switch step, in centimeters. set g_fVrHandKnobStepDeg 15 // Wrist turn per knob notch, in degrees. set g_fVrHandModelScale 1.0 // Glove size on top of the measured hand (default 1.0). set g_bVrMouseRay 1 // Under quad views the mouse picks switches as a RAY; the stock search measures against the view being drawn, not the cursor's own. Stereo mode keeps the stock path either way; 0/OFF disables the ray entirely. set g_bVrTextQuads 1 // Show VR text (chat, subtitles, messages, exit and ring menus) on OpenXR quads; OFF draws it into the scene as before. set g_bVrTextQuadsInCockpit 1 // If enabled, text quads will be positioned in the forward part of the cockpit (you can look away from them). OFF setting = move with the VR head POV. set g_bVrImGuiQuadInCockpit 0 // If enabled, ImGui text boxes will be positioned in the forward part of the cockpit (where you can look away from them). OFF setting = move with the VR head POV. set g_sVrSubtitlesFontName "" // The VR quads' subtitle and chat font family--set between ""; with optional trailing "Bold" / "Italic" -- e.g., "Arial Bold", "Times New Roman Bold". Blank = default font. set g_bVrSubtitlesQuadMovable 0 // The VR chat/subtitle quad as a window -- moved by its title bar, sized from its bottom corners; layout is kept in /Config/VrChatQuad.xml set g_bVrKeepOpenXrInstance 1 // Keep the OpenXR instance for the life of the process instead of destroying and recreating it with every session change (menu <-> 3D). 0 restores the old behaviour, for comparing VRAM use across missions. set g_fVRRenderOffsetBackward 0.0 // Adjust render offset for mixed reality, lateral drifting set g_fVRRenderOffsetUp 0.0 // Adjust render offset for mixed reality, pitch drifting